← STONE COLLECTION
Huron natural Michigan stone veneer
90% DOLOMITE LIMESTONE, 10% SOO LOCK SANDSTONE

Huron

ASHLARFIELD LEDGELEDGE

Request a sample

The side of the state that gets the light first.

Two hundred miles of Lake Huron shoreline runs north along US-23, and people set alarms for it. Tawas Point, Harrisville, the long empty beaches north of Oscoda. The sun comes flat across the water somewhere around a quarter to six and the whole shore goes gold for about twenty minutes before the day turns ordinary again.

Huron is those twenty minutes. Warm tans and creams and soft golds, with enough gray running through it to keep the stone honest instead of sweet. It comes out of the limestone country sitting behind that shoreline, which is not a coincidence — the same rock that built the coast is the rock in the wall.

On a traditional or transitional house it does the thing clients struggle to ask for: it makes a new build feel like it has been standing a while. It is also the most forgiving blend we cut next to existing brick, which matters more on an addition than on anything else.

Blend specifications.

COLOR
90% various shades of gray and buff, 10% various shades of red, with a range of molted to solid in color
PRODUCT WEIGHT
  • Thin veneer: 10-14 pounds/square foot
  • Not available in full-bed depth
LENGTH
6-20 inches (average of 12 inches)
WIDTH (DEPTH)
  • Thin veneer: .5-1.5 inches
  • Not available in full-bed
CORNER RETURNS
Varies in length of return, minimum of 3 inches
QUARRY ORIGIN
Quarried in Onaway and Sault Ste. Marie, Michigan. Cut and processed at our mill in Howard City, Michigan.

Available in three cuts.

Geology and height, typical piece change from cut to cut. Everything else is identical.

Huron Ashlar cut swatch

Huron Ashlar

4-8 INCHES (AVERAGE OF 6 INCHES)
GEOLOGY
90% Dolomite limestone, 10% Soo Lock Sandstone
HEIGHT
4-8 inches (average of 6 inches)
TYPICAL PIECE
Rough-cut stone with a natural cleft top and bottom. Face of stone is a mixture of split and seam face. Ends are random and not trimmed. Backs are sawn for thin veneer. Not available in full-bed depth.

↓ DOWNLOAD ASHLAR SPEC SHEET

Huron Field Ledge cut swatch

Huron Field Ledge

1-8 INCHES (AVERAGE OF 5 INCHES)
GEOLOGY
90% Dolomite Limestone, 10% Soo Lock Sandstone
HEIGHT
1-8 inches (average of 5 inches)
TYPICAL PIECE
Rough-cut stone with a natural cleft top and bottom. Face of stone is a mixture of split and seam face. Ends are random and not trimmed. Field Ledge will have approximately 10-20 percent in irregular (non-linear) shapes. Backs are sawn for thin veneer. Not available in full-bed depth.

↓ DOWNLOAD FIELD LEDGE SPEC SHEET

Huron Ledge cut swatch

Huron Ledge

1-4 INCHES (AVERAGE OF 3 INCHES)
GEOLOGY
90% Dolomite Limestone, 10% Soo Lock Sandstone
HEIGHT
1-4 inches (average of 3 inches)
TYPICAL PIECE
Rough-cut stone with a natural cleft top and bottom. Face of stone is a mixture of split and seam face. Ends are random and not trimmed. Backs are sawn for thin veneer. Not available in full-bed depth.

↓ DOWNLOAD LEDGE SPEC SHEET

Please note: the beauty of natural stone is in its variety and range of color. Small pictures and samples are not fully representative. We do not recommend making a selection based on pictures alone — request a physical sample.

Hold it before you decide.
Request a sample.

Physical sample shipped to you. No obligation, no pressure.

Request a sample← All blends